Once upon a time I had grand ambitions of writing blog posts outlining all of the examples in the Ecological Detective.^{1} A few years ago I participated in a graduate seminar series where we went through many of the examples in this book. I am not a population biologist by trade but many of the concepts were useful for not only helping me better understand core concepts of statistical modelling, but also for developing an appreciation of the limits of your data. Part of this appreciation stems from understanding sources and causes of uncertainty in estimates. Perhaps in the future I will focus more blog topics on other examples from The Ecological Detective, but for now I’d like to discuss an example that has recently been of interest in my own research.

Over the past few months I have been working with some colleagues to evaluate statistical power of biological indicators. These analyses are meant to describe the certainty within which a given level of change in an indicator is expected over a period of time. For example, what is the likelihood of detecting a 50% decline over twenty years considering that our estimate of the indicators are influenced by uncertainty? We need reliable estimates of the uncertainty to answer these types of questions and it is often useful to categorize sources of variation. Hilborn and Mangel describe process and observation uncertainty as two primary categories of noise in a data measurement. Process uncertainty describes noise related to actual or real variation in a measurement that a model does not describe. For example, a model might describe response of an indicator to changing pollutant loads but we lack an idea of seasonal variation that occurs naturally over time. Observation uncertainty is often called sampling uncertainty and describes our ability to obtain a precise data measurement. This is a common source of uncertainty in ecological data where precision of repeated surveys may be affected by several factors, such as skill level of the field crew, precision of sampling devices, and location of survey points. The effects of process and observation uncertainty on data measurements are additive such that the magnitude of both can be separately estimated.

The example I’ll focus on is described on pages 59–61 (the theory) and 90–92 (an example with pseudocode) in The Ecological Detective. This example describes an approach for conceptualizing the effects of uncertainty on model estimates, as opposed to methods for quantifying uncertainty from actual data. For the most part, this blog is an exact replica of the example, although I have tried to include some additional explanation where I had difficulty understanding some of the concepts. Of course, I’ll also include R code since that’s the primary motivation for my blog.

We start with a basic population model that describes population change over time. This is a theoretical model that, in practice, should describe some actual population, but is very simple for the purpose of learning about sources of uncertainty. From this basic model, we simulate sources of uncertainty to get an idea of their exact influence on our data measurements. The basic model without imposing uncertainty is as follows:

where the population at time is equal to the population at time multiplied by the survival probability plus the number of births at time . We call this the process model because it’s meant to describe an actual population process, i.e., population growth over time given birth and survival. We can easily create a function to model this process over a time series. As in the book example, we’ll use a starting population of fifty individuals, add 20 individuals from births at each time step, and use an 80% survival rate.

# simple pop model proc_mod <- function(N_0 = 50, b = 20, s = 0.8, t = 50){ N_out <- numeric(length = t) N_out[1] <- N_0 for(step in 1:t) N_out[step + 1] <- s*N_out[step] + b out <- data.frame(steps = 1:t, Pop = N_out[-1]) return(out) } est <- proc_mod()

The model is pretty straightforward. A `for`

loop is used to estimate the population for time steps one to fifty with a starting population size of fifty at time zero. Each time step multiplies the population estimate from the previous time step and adds twenty new individuals. You may notice that the function could easily be vectorized, but I’ve used a `for`

loop to account for sources of uncertainty that are dependent on previous values in the time series. This will be explained below but for now the model only describes the actual process.

The results are assigned to the `est`

object and then plotted.

library(ggplot2) ggplot(est, aes(steps, Pop)) + geom_point() + theme_bw() + ggtitle('N_0 = 50, s = 0.8, b = 20\n')

In a world with absolute certainty, an actual population would follow this trend if our model accurately described the birth and survivorship rates. Suppose our model provided an incomplete description of the population. Hilborn and Mangel (p. 59) suggest that birth rates, for example, may fluctuate from year to year. This fluctuation is not captured by our model and represents a source of process uncertainty, or uncertainty caused by an incomplete description of the process. We can assume that the effect of this process uncertainty is additive to the population estimate at each time step:

where the model remains the same but we’ve included an additional term, , to account for uncertainty. This uncertainty is random in the sense that we don’t know exactly how it will influence our estimate but we can describe it as a random variable from a known distribution. Suppose we expect random variation in birth rates for each time step to be normally distributed with mean zero and a given standard deviation. Population size at is the survivorship of the population at time plus the births accounting for random variation. An important point is that the random variation is additive throughout the time series. That is, if more births were observed for a given year due to random chance, the population would be larger the next year such that additional random variation at is added to the larger population. This is why a `for`

loop is used because we can’t simulate uncertainty by adding a random vector all at once to the population estimates.

The original model is modified to include process uncertainty.

# simple pop model with process uncertainty proc_mod2 <- function(N_0 = 50, b = 20, s = 0.8, t = 50, sig_w = 5){ N_out <- numeric(length = t + 1) N_out[1] <- N_0 sig_w <- rnorm(t, 0, sig_w) for(step in 1:t) N_out[step + 1] <- s*N_out[step] + b + sig_w[step] out <- data.frame(steps = 1:t, Pop = N_out[-1]) return(out) } set.seed(2) est2 <- proc_mod2() # plot the estimates ggt <- paste0('N_0 = 50, s = 0.8, b = 20, sig_w = ',formals(proc_mod)$sig_w,'\n') ggplot(est2, aes(steps, Pop)) + geom_point() + theme_bw() + ggtitle(ggt)

We see considerable variation from the original model now that we’ve included process uncertainty. Note that the process uncertainty in each estimate is dependent on the estimate prior, as described above. This creates uncertainty that, although random, follows a pattern throughout the time series. We can look at an auto-correlation plot of the new estimates minus the actual population values to get an idea of this pattern. Observations that are closer to one another in the time series are correlated, as expected.

Adding observation uncertainty is simpler in that the effect is not propagated throughout the time steps. Rather, the uncertainty is added after the time series is generated. This makes intuitive because the observation uncertainty describes sampling error. For example, if we have an instrument malfunction one year that creates an unreliable estimate we can fix the instrument to get a more accurate reading the next year. However, suppose we have a new field crew the following year that contributes to uncertainty (e.g., wrong species identification). This uncertainty is not related to the year prior. Computationally, the model is as follows:

where the model is identical to the deterministic model with the addition of observation uncertainty after the time series is calculated for fifty time steps. is the population estimate for the whole time series and is the estimate including observation uncertainty. We can simulate observation uncertainty using a random normal variable with assumed standard deviation as we did with process uncertainty, e.g., has length fifty with mean zero and standard deviation equal to five.

# model with observation uncertainty proc_mod3 <- function(N_0 = 50, b = 20, s = 0.8, t = 50, sig_v = 5){ N_out <- numeric(length = t) N_out[1] <- N_0 sig_v <- rnorm(t, 0, sig_v) for(step in 1:t) N_out[step + 1] <- s*N_out[step] + b N_out <- N_out + c(NA,sig_v) out <- data.frame(steps = 1:t, Pop = N_out[-1]) return(out) } # get estimates set.seed(3) est3 <- proc_mod3() # plot ggt <- paste0('N_0 = 50, s = 0.8, b = 20, sig_v = ', formals(proc_mod3)$sig_v,'\n') ggplot(est3, aes(steps, Pop)) + geom_point() + theme_bw() + ggtitle(ggt)

We can confirm that the observations are not correlated between the time steps, unlike the model with process uncertainty.

Now we can create a model that includes both process and observation uncertainty by combining the above functions. The function is slightly tweaked to return include a data frame with all estimates: process model only, process model with process uncertainty, process model with observation uncertainty, process model with process and observation uncertainty.

# combined function proc_mod_all <- function(N_0 = 50, b = 20, s = 0.8, t = 50, sig_w = 5, sig_v = 5){ N_out <- matrix(NA, ncol = 4, nrow = t + 1) N_out[1,] <- N_0 sig_w <- rnorm(t, 0, sig_w) sig_v <- rnorm(t, 0, sig_v) for(step in 1:t){ N_out[step + 1, 1] <- s*N_out[step] + b N_out[step + 1, 2] <- N_out[step, 1] + sig_w[step] } N_out[1:t + 1, 3] <- N_out[1:t + 1, 1] + sig_v N_out[1:t + 1, 4] <- N_out[1:t + 1, 2] + sig_v out <- data.frame(1:t,N_out[-1,]) names(out) <- c('steps', 'mod_act', 'mod_proc', 'mod_obs', 'mod_all') return(out) } # create data set.seed(2) est_all <- proc_mod_all() # plot the data library(reshape2) to_plo <- melt(est_all, id.var = 'steps') # re-assign factor labels for plotting to_plo$variable <- factor(to_plo$variable, levels = levels(to_plo$variable), labels = c('Actual','Pro','Obs','Pro + Obs')) ggplot(to_plo, aes(steps, value)) + geom_point() + facet_wrap(~variable) + ylab('Pop. estimate') + theme_bw()

On the surface, the separate effects of process and observation uncertainty on the estimates is similar, whereas the effects of adding both maximizes the overall uncertainty. We can quantify the extent to which the sources of uncertainty influence the estimates by comparing observations at time to observations at . In other words, we can quantify the variance for each model by regressing observations separated by one time lag. We would expect the model that includes both sources of uncertainty to have the highest variance.

# comparison of mods # create vectors for pop estimates at time t (t_1) and t - 1 (t_0) t_1 <- est_all[2:nrow(est_all),-1] t_1 <- melt(t_1, value.name = 'val_1') t_0 <- est_all[1:(nrow(est_all)-1),-1] t_0 <- melt(t_0, value.name = 'val_0') #combine for plotting to_plo2 <- cbind(t_0,t_1[,!names(t_1) %in% 'variable',drop = F]) head(to_plo2) ## variable val_0 val_1 ## 1 mod_act 60.0000 68.00000 ## 2 mod_act 68.0000 74.40000 ## 3 mod_act 74.4000 79.52000 ## 4 mod_act 79.5200 83.61600 ## 5 mod_act 83.6160 86.89280 ## 6 mod_act 86.8928 89.51424 # re-assign factor labels for plotting to_plo2$variable <- factor(to_plo2$variable, levels = levels(to_plo2$variable), labels = c('Actual','Pro','Obs','Pro + Obs')) # we don't want to plot the first process model sub_dat <- to_plo2$variable == 'Actual' ggplot(to_plo2[!sub_dat,], aes(val_0, val_1)) + geom_point() + facet_wrap(~variable) + theme_bw() + scale_y_continuous('Population size at time t') + scale_x_continuous('Population size at time t - 1') + geom_abline(slope = 0.8, intercept = 20)

A tabular comparison of the regressions for each plot provides a quantitative measure of the effect of uncertainty on the model estimates.

library(stargazer) mods <- lapply( split(to_plo2,to_plo2$variable), function(x) lm(val_1~val_0, data = x) ) stargazer(mods, omit.stat = 'f', title = 'Regression of population estimates at time $t$ against time $t - 1$ for each process model. Each model except the first simulates different sources of uncertainty.', column.labels = c('Actual','Pro','Obs','Pro + Obs'), model.numbers = F)

The table tells us exactly what we would expect. Based on the r-squared values, adding more uncertainty decreases the explained variance of the models. Also note the changes in the parameter estimates. The actual model provides slope and intercept estimates identical to those we specified in the beginning ( and ). Adding more uncertainty to each model contributes to uncertainty in the parameter estimates such that survivorship is under-estimated and birth contributions are over-estimated.

It’s nice to use an arbitrary model where we can simulate effects of uncertainty, unlike situations with actual data where sources of uncertainty are not readily apparent. This example from The Ecological Detective is useful for appreciating the effects of uncertainty on parameter estimates in simple process models. I refer the reader to the actual text for more discussion regarding the implications of these analyses. Also, check out Ben Bolker’s text^{2} (chapter 11) for more discussion with R examples.

Cheers,

Marcus

^{1}Hilborn R, Mangel M. 1997. The Ecological Detective: Confronting Models With Data. Monographs in Population Biology 28. Princeton University Press. Princeton, New Jersey. 315 pages.

^{2}Bolker B. 2007. Ecological Models and Data in R. Princeton University Press. Princeton, New Jersey. 508 pages.

Process and observation uncertainty explained with R ← Patient 2 Earn

Process and observation uncertainty in Populations explained with R | Four Crossed Spoke

I was trying to investigate forrester diagrams (I’m a newbie) and I found this and I think it is a great study.

Thanks for the article.

I’m always happy to hear when my posts are useful. Thanks for reading!